Phenomenal . . .

Phenomenal . . .
Life, Growth, and Connection (This sunflower was nourished by my hands.) 2010; Photography by Benita Blocker. Please become a follower of this blog.

Total Pageviews

Showing posts with label creeping oxidation. Show all posts
Showing posts with label creeping oxidation. Show all posts

Tuesday, September 10, 2013

Relaxer Tips and Talk

For those who are not ready to go natural, here's some helpful relaxer tips and talk:

1) For those who have long length, make sure that the relaxer residue gets shampooed out of the ends as well as the roots.  Many times, I have focussed mainly on making sure the roots are free of relaxer residue.  I am thinking that since I only put the relaxer application at the new growth at the roots, I should not need to focus on the ends of the hair.  However, to the contrary, we do need to focus on the ends because they are getting hit with all the runoff water from the relaxer.  Those long ends will also soak up the relaxer water in the shampoo bowl as we thoroughly rinse, rinse, rinse.  Just make sure that you work neutralizing shampoo vigorously through the hair ends with each lathering; otherwise, if relaxer get trapped in the hair ends, then it will begin "creeping oxidation."  The client will experience split ends, frizziness, breakage, and some hardness in the ends.  How to correct this?  At home, client can use a lot of moisturizer to keep the pH from elevating until  she can make it into the salon for a deep cleansing shampoo in order to clarify the residue out of the ends.  After clarifying the ends, then another neutralizing shampoo lather can be used through the ends for pH balancing.



2)  Keep some NuExpressions Super 10 in 1 Conditioner on hand.  I believe it is the only conditioner on the market with a color indicator in it to identify relaxer residue and begin to neutralize it.  At the nape, sometimes I am uncertain if I see suds or diluted residue, I spread some of this 10 in 1 in that area, and if it turns HOT pink, then I need to rinse and shampoo again. So at any time, you question anything potentially relaxer related, just squirt the NuExpressions 10 in 1 and the truth will be revealed.  Clear or White means that no relaxer is present.  Again, Pink means relaxer is present.  Many neutralizing shampoos have color indicators which is good, but what if you have white lather after testing an area - with the conditioner you can leave it on and add their main conditioner to the rest of the head without having to worry about rinsing shampoo out.  The 10 in 1 conditioner saves time when everything is all clear.

3) Breakage points are at every turn in your natural curl pattern.  The less natural curl that you have, then the less break points and the least amount of relaxer penetration points.  The more curl to the hair, then the more breakage points to be concerned about.  In addition, even after the relaxer seeks out all the di-sulfide bonds and smooths them out, as one of my clients pointed out, the breakage points are hidden because they are relaxed straight, but they are still there.  This particular client never cuts her hair.  Two years without a haircut so far, but with swimming and her active lifestyle, her length seems to just maintain a medium below shoulder length.  She still gets relaxer touch-ups every three months, but she realizes that it seems that her length stays close to stagnant.  Actually, this reminds me that I need to ask her to come in for a protein treatment a week before her relaxer service.  I only would see her when she calls for her chemical appointment.  I need to push to get more people either doing their own protein treatment at home every couple of months or they should come into the salon for the treatment. The protein treatments will reinforce the integrity of the strands to prepare them for a chemical service.

Saturday, April 14, 2012

Relaxer Residue Lingering Around

Look closer at this picture. Do you see the white relaxer residue on the shampoo nozzle? Be careful when rinsing out your relaxer bowl as well as while rinsing out a relaxer service. Relaxer residue can get caught on the shampoo nozzle. I found that if you try to push the residue off the nozzle with your fingers, that it just slides around in a circle. I literally had to take a paper towel to remove the residue.

Many of the relaxers have been adding more and more oils and butters to their formulas to make it more tolerable to the "sensitive" scalp clientele, but I do not think that the relaxer rinses off in water as well. Remember water and oil don't mix.

Just be more aware and check that your shampoo nozzle stays clear of relaxer residue. If this residue seeps into your client's rinse water; it may cause "creeping oxidation." This is where the relaxer residue may get trapped in the hair past the neutralizing phase. It can cause the hair not to neutralize properly because there is a "foreign object" present.

If you feel any chalkiness or any slickness at any time after rinsing or neutralizing the hair, then check your shampoo nozzle and go for another neutralizing shampoo lather making sure that the lather is White. Although such as small amount of relaxer may not be enough to turn the lather pink enough to see.

Thursday, March 15, 2012

Hair color: Progressive versus Non-progressive oxidation processing

Yes! Color was calling me!!! I decided to experiment with this new color: DX3427. And yes, it's protective styling! "Wink" It is the same style as before: "B. Morning".

On a more serious note, I just took a Chi color class. They are advertising it as ammonia-free as well as ppd-free. Those who are allergic to hair color are usually allergic to the PPD's. Please see my separate article about hair color allergies.

Also, while in the class, it was mentioned that the Chi hair color is non-progressive as far as its oxidation process. This technically means that it will not turn the client's hair darker than desired if you leave it on the hair past the normal processing time.

You may ask why is that important? Well, if you are foiling a client's hair for dimensional coloring, then unless you are a speed foiler or have an assistant, then hair color can be on a client's hair for an extended period of time. Imagine the first foil that you place in comparison to the time lapse on the last foil that you place. Get the picture?

Okay. If the color is progressive versus non-progressive, then the first foil you put in may have lifted to the desired color and then it may have started to darken back up. So you will not end up with the desired color by the time that you rinse all the foils out.

Your multi-dimensional color service would be ruined. Yes. I have had this happen to me in the past, and I had no idea why. Through enough color classes like Igora10 and Chi, I learned about non-progressive oxidation versus progressive oxidation.

Color lines such as Avlon's Moisturcolor and Schwarzkopf Igora10 hair color will go dark if you keep it on the client's hair longer than the recommended timing.

Chi and Wella color lines are non-progressive and pretty true to color.

The Chi Color line also offers Infra Shampoo and Color Lock Treatment. The Infra Shampoo is great for shampooing the "bad stuff" out of the color process. The Color Lock Treatment is designed to avoid "creeping oxidation." If for some reason, haircolor residue gets left in the hair, it can gradually continue lightening or damaging the hair at a slow pace. (i.e. creeping oxidation)

I initially heard this term: "creeping oxidation" in a hair class taught by platform artist Belinda Baker. It was relevant to relaxer residue getting stuck in the hair due to insufficient rinsing time and shampooing. The Chi Color Lock treatment is designed to assist in neutralizing all alkaline chemicals.