Phenomenal . . .

Phenomenal . . .
Life, Growth, and Connection (This sunflower was nourished by my hands.) 2010; Photography by Benita Blocker. Please become a follower of this blog.

Total Pageviews

Friday, January 17, 2014

Three Do-It-Yourself Interlocking Tools

1) The Sisterlocks (tm) Clip Tool is designed with a spring hook to latch onto a lock and then you  feed it through the base of the lock.

Disadvantage of Clip Tool:  If the dreadlock is dry and brittle, the spring action of the clip can break the lock completely off.  One of the Sisterlocks Certified consultants clipped the tool to my lock without any regards of the spring action of the hook, and I swear that my lock broke completely off where the clip tool was attached.  The consultant apologized to me about the lock snapping off and then moved on to the next one.  So no, I am not fond of this tool.  People should be cautious to gently attach the hook to the lock.

2) A Safety pin has been suggested by Stylist Jovan on youtube.  You actually just pin the safety pin on the end of the dreadlock and feed the smooth end through the lock as if it was the Sisterlocks "clip" tool.

Disadvantage of the Safety pin: Piercing through the lock over the course of a year may weaken the lock, and the closure end of the safety pin may accidently catch some hair if one is not careful when feeding it through the roots of the locks.

3) The hair pin:  The coolest method yet! It is a partial feed through the base of the lock. Youtube channel Chocolatemilk0104 has a video to teach you at https://www.youtube.com/watch?v=RlWTWiLBqQo

Disadvantage of the hair pin:  If your lock partings are smaller than the width of  hairpin, then this method may not work because the hair pin would be too wide.

6 comments:

  1. hi, do you know where i can purchase the clip tool?

    ReplyDelete
    Replies
    1. Sisterlocks headquarters, but I believe that only consultants can purchase Sisterlocks tools.

      Delete
  2. You can take a hairclip those black ones and break off the middle clip and there you go it's what I used

    ReplyDelete
  3. Pipe cleaner made in a loop works too feed the hair in the loop and presto

    ReplyDelete
  4. My sister locks are small. My loctician uses the clip and she does fine with it. Never had a problem for years. I would personally like to aquire the tools in the set, especially the bigger one. Why do they make it so exclusive. You can find it nowhere. I mean, like charge for it if you have to but don't make it exorbitant. I would like to aquire them, so if there is a consultant that wishes to get it for me, I would be most appreciative. Some of my locks are so small, the crotchet needle if too big for it. I need something small if I am going to have to lock it myself. My hairdresser takes like anywhere between 3 to four hours to do my hair. Sometimes I am way overdue. Would appreciate the assistance, please feel free to email me. As I go, I just want to invite you to make JESUS CHRIST of Nazareth your life and all. Make Him the center of your life so that HE can be the driving force of all that you think say and do. JESUS is coming again. Are you ready to meet your GOD?

    ReplyDelete
    Replies
    1. I am not authorized to speak on behalf of Sisterlocks. I will encourage you to read my article on hand interlocking. I believe that I also speak on it on my YouTube channel.

      Delete